Audio Interfaces - Redbox - Accessories
Redbox Accessories
Rack Mounting
For rack mounting smaller (28cm) (11”) units the optional RB-RK1 (Red) or RB-RK1B (Black) kit can be used (which include 4 off M6 panel fixing screws).
RB-RK1 Wherever you see this symbol 
an RB-RK1 rackmount kit can be used.
|
|
| RB-SC1 | Sample rate converter |
| RB-UL1 | Unbalanced to balanced single converter |
| RB-UL2 | Dual unbalanced to balanced converter |
| RB-BL2 | Unbalanced to balanced bi-directional converter |
| RB-PA2 | Dual stereo RIAA phono amplifier |
| RB-LI2 | Stereo line isolation unit |
| RB-DDA6A | 6 way AES/EBU digital distribution amplifier |
| RB-DDA6S | 6 way S/PDIF digital distribution amplifier |
| RB-DDA6W | 6 way word clock distribution amplifier |
| RB-MA1 | Single microphone amplifier |
| RB-MA2 | Dual microphone amplifier |
| RB-ML2 | Stereo microphone & line level limiter |
| RB-SL2 | Twin mono, or stereo, limiter |
| RB-SM1 | Single stereo to mono converter |
| RB-SM2 | Dual stereo to mono converter |
| RB-LC3 | Light/Power controller |
| RB-MM1 | Mix-minus generator |
Rear Panel Mounting
For rear panel mounting you can use either the RB-RK2, or RB-RK3, depending on the size of your Redbox.
RB-RK2 1U rear panel rack kit for small Redbox range, e.g., RB-BL2.
Wherever you see this symbol 
an RB-RK2 small Redbox rear panel rack kit ears can be used.
RB-RK3 1U rear panel rack kit for large Redbox range, e.g., RB-DA6. Wherever you see this symbol 
an RB-RK3 large Redbox rear panel rack kit ears can be used.
Front Panel Kits for Redboxes
A number of customers have asked for non-rackable fronts for the RB-HD1, RB-HD2, RB-ADDA,
RB-UL4, RB-BL4 and RB-LU4. These are available without rack-ears as: RB-FR1, RB-FR2
and RB-FR3.
RB-FR1 - Front panel, no 19” mount, for RB-ADDA, RB-UL4, RB-BL4 & RB-LU4. Wherever you see this symbol 
an RB-FR1 panel kit can be used.
RB-FR2 - RB-HD1 or RB-DAC1 front panel, no 19” rack mount. Wherever you see this symbol 
an
RB-FR2 panel kit can be used.
RB-FR3 - RB-HD2 front panel, no 19” rack mount. Wherever you see this symbol 
an RB-FR3 panel kit can be used.
Synchronisation Add-On Boards - used with the RB-SC2 and RB-TGHD(B & X) |
|||
| RB-SYA | Analogue Video Sync Add-On Board | more >> |  |
| RB-SYD | Digital Video Sync Add-On Board | more >> |  |
| RB-SYE | AES/EBU Sync Board | more >> |  |
| RB-SYW | Word Clock Sync Board | more >> |  |
