You are at : Sonifex Ltd > Product Catalogue > Software Downloads > SCi Versions and Download
 Cards Accepted
 
SCi Software Versions and Download

    SCi V1.031
  • Alterations
      Reference Monitor
    • !!FIXED - When renaming sources/banks, source does not switch over aswell
    • !!FIXED - Bypassing and re-enabling eq bands works properly now.
    • **Improvement - Digital Lock only will show when a digital signal is present
    • **Improvement on the handling of irrellevant values being inputed into edit boxes
    • **Improvement - renaming Source edit box now automatically has focus for use to type right away.
    • ++Sci Now recalls presets from the Refmon and Matches them to a known preset
    • **Improvement of EQ Storing and Recalling presets
    • Bandwidth has been limited to 1dp to corellate with faders
    • New Panel Added to show when unit is Disconnected
    • Active band buttons determine whether bands are in use (don't have a "0" in the gain box) If they are active then they glow red. These also allow thee user to bypass the eq for that band
    • The functionality of the checkboxes has changed so that when checked, they determine the band you are editing.
    • ++Added Scales for Faders - however logarithmic frequency may be a good idea for the future.
    • !!FIXED - Moved text for EQ Preset renaming label
    • !!FIXED - Source Renaming box now appears in the correct place
    • !!FIXED - Deleting a EQ Preset now defaults to flat response
    • ++Bank and Source Edit automatically displays current name. Bank and Source are unique to their kind rather than 'Bank/Source Names'
    • ++Bevel appears around selected EQ band when using faders
    • !!Faders now move to proper set values when selecting bands.
    • **Added a dvider line to separate sources from EQ Section
    • **Bank/Source Text made bigger
    • **EQ Preset Combo is now massive so it is easy to select EQ Presets
    • **EQ Buttons now look good
    • **EQ Faders are transparent
    • **Bank Source Edit - One button will be shown and switched to the other depending upon what action is taken.
    • !!FIXED - If values are the same in the Edit Boxes (EQ) then Set EQ is not called.
    • !!FIXED - If one preset is loaded and then the same preset is loaded again, then Set EQ is not called.
    • **Sorted out the Font on specific labels
    • !!FIXED - Can move slider with arrow keys then press enter to apply values.
    • !!FIXED - Can now untick PRESENSE Detection
    • !!FIXED - Can now Overtype Values
    • !!FIXED - Minimize now works
    • !!FIXED - Now has tab order working on Edit Boxes.
    • !!FIXED - When disconnected - will connect when clicking connect
      RB-PD2
    • Added driver for RB-PD2
    SCi V1.026
  • Alterations
      Reference Monitor
    • Ability to rename Banks and Sources
    • Digital Lock only will show when a digital signal is present
    • Improved handling of invalid values being inputed into edit boxes
    • Recalls presets from the Refmon and Matches them to a known preset
    SCi V1.025
  • Alterations
  • Reference Monitor EQ Bug Fixes
    SCi V1.022
  • Alterations
  • Support for Sonifex Reference Monitors
    • Front Panel Modifiers
    • Firmware Upload
    • EQ Settings
    SCi V1.020
  • Alterations
  • DHY-03 Support for new options within firmware V1.49+
    • Reverse ML_Func remote polarity
    • Remote line hold override
    • Use lower noise gate threshold
    SCi V1.019
  • Alterations
  • RB-SC2 screen alterations.
  • RB-SC2 USB comms check before firmware upload.
  • RB-DS2 added 'Reset to Factory Defaults' command.
    SCi V1.017
  • Alterations
  • Altered Discover Devices procedure to avoid com port lock-ups
    SCi V1.015
  • Alterations
  • Added 'Use Divert Relay' to DHY-03 Device
  • Added preliminary RB-SC2 Device
    SCi V1.011
  • Alterations
  • Minor alteration to user interface when adding/editing DHY-03 phone book entry.
    SCi V1.010
  • Alterations
  • Added DHY-03EC to 'Edit Device Information' device selection.
  • Added 'Alternative Phone Book' to DHY-03 menu.
    • Allows user to create/select alternative phone book - locally or on a network
  • Added 'Default Phone Book' to DHY-03 menu.
    • Allows user to use default local phone book '\ini\dhy03_phonebook.ini'.
    SCi V1.009
  • Alterations
  • DHY-03 Driver Update to support firmware V1.43
    SCi V1.007
  • Alterations
  • Addition of question 'Are you using USB-to-Serial adaptor?' when uploading firmware to DHY-03 unit. Improved upload reliability.
    SCi V1.006
  • Alterations
      Firmware Compatible:
    • DHY-03 V1.26
  • DHY03.INI file changes to allow compatibility testing between mismatched SCi and firmware versions.
    SCi V1.004
  • Alterations
      Firmware Compatible:
    • DHY-03 V1.21
    • RB-DS2 V1.00
    • RB-ADDA2 V1.00
  • Bug Fixes
    • Incorrect User Tones saved to DHY-03 - fixed.

    SCi V1.001
  • Alterations
      Firmware Compatible:
    • DHY-03 V1.13

    SCi V1.000
  • Initial Release
      Firmware Compatible:
    • DHY-03 V1.01 to V1.11
Home | Recycling | Store | Products | Contact | Privacy Statement | Press Releases
Sonifex Ltd. 61 Station Road, Irthlingborough, Northants, NN9 5QE, UK.
Tel: +44 (0)1933 650700 Fax: +44 (0)1933 650726 EMail: sales@sonifex.co.uk